ANY MAKE, MODEL, YEAR

Design :Custom

xeon
xeon
xeon
xeon
xeon

Going custom allows you to build your wrap unique from the ground up. You supply the direction, we’ll supply the creativity. Custom boat wrap design is a great way to achieve that specific look you desire. Have sponsors? Make them happy by keeping in line with their brand message across all media. Even better, our custom design fee is only $389. Have your own designer? Not a problem! We’ll work with them to make sure everything goes perfectly.

CUSTOMIZE IT


Vinyl: 3M IJ-180cV3

  • A 2Mil Ultra-Premium Cast Vinyl.
  • 10 year durability (unprinted)
  • 5 year durability (printed)
  • Clean removability within 5 years. After 5 years it becomes increasingly difficult to remove.

Laminate: 3M 8518 Gloss or 3M8520 Matte – Your Choice!

  • A 2Mil Ultra-Premium UV Cast Laminate
  • Gloss is standard
  • No additional charge for matte laminate.

There are important considerations to consider to determine if a wrap is right for you!

  • Typically the wrap will NOT cover the front 6-12 inches of the keel. This is because when loading the boat into a traditional trailer, the keel will slide into the rubber winch wheel and instantly damage the wrap. To prevent this, we cut the wrap back several inches on both sides exposing the original gelcoat of your boat which will fare much better.
  • We highly recommend stopping the wrap at the water line. Though many of our customers wrap below with great results, all vinyl manufacturers void any responsibility for the wrap.
  • We also recommend stopping the wrap from going too high on the boat. We like to stop it short of the edge of the deck, before it turns flat (where people walk/step into the boat). This will help to avoid damage from foot traffic, dragging coolers, water sports equipment, and more.
  • Not all areas can or should be wrapped. Please consult your installer prior to installation for advice.